Note: lists.riscv.org will be down for maintenance on Wednesday, October 5th, starting at 9AM Pacific Time (4PM Wednesday October 5, 2022 UTC), for approximately one hour.
- [PATCH v6 1/2] riscv-platform-spec: PLIC and CLINT for Linux-2022 platform
Re: [PATCH v6 1/2] riscv-platform-spec: PLIC and CLINT for Linux-2022 platform
On Sat, 2021-05-29 at 22:42 +0800, renba.chang@... wrote:
From: Abner Chang <renba.chang@...>
Initial description of PLIC CLINT section of Linux-2022 platform.
On v6 commit,
Remove the changes in Embedded-2022 section.
On v5 commit,
- Remove CLINT from platform spec
- Require ACLINT on Linux2020 platform and have a link to
- Remove Machine mode timer from previous patch because that is in the
scope of ACLINT
- For Embedded-2022 platform, mention Machine mode timer and refer to
ACLINT for the definition of registers
On v4 commit,
- PLIC section with [DEPRECATED] in Linux- 2022 chapter
- CLINT section in Linux- 2022 chapter for M-mode timer. We don't
IPI because AIA already supported it.
- In Embedded-2022 Machine mode timer section, CLINT is not mandatory.
- Separate section in appendix for the Machine mode timer registers
On v3 commit,
- Address review comments.
On v2 commit,
- CLINT is not deprecated.
- Add a standalone section for Machine Mode Timer in System
Do you think this is a good place for Machine Mode Timer?
@Mayuresh, please check if you are ok with this change, not sure if
overlaps with your text or not (The timer setion). I can remove this
if you prefer to put this with your patch.
- In Embedded-2022, refer to Machine Mode Timer in System Peripherals
section and CLINT in Linux-2022 Platform.
@Alistair, is this ok?
On v1 commit,
- Not sure where to put the [DEPRECATED].
- Change the reference of PLIC in section 2.2.2. Interrupt Controller
184.108.40.206 PLIC + CLINT section.
Signed-off-by: Abner Chang <renba.chang@...>
Cc: Alistair Francis <alistair.francis@...>
Cc: Sunil V L <sunilvl@...>
Cc: Mayuresh Chitale <mchitale@...>
Acked-by: Alistair Francis <alistair.francis@...>
riscv-platform-spec.adoc | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/riscv-platform-spec.adoc b/riscv-platform-spec.adoc
index 160c74a..c0ee75d 100644
@@ -49,9 +49,24 @@ include::profiles.adoc
* Start Address
==== Interrupt Controller
-* PLIC + CLINT
-* Interrupt Assignments
+The Platform Level Interrupt Controller (PLIC) provides facilities to
+the non-local interrupts to the external interrupt of a hart context
+with a given privilege mode in a given hart. The number of non-local
+sources supported by PLIC and how does each of them connect to the
+context is PLIC core implementation-specific. +
+for the implementation reference of PLIC operation parameters)
+Linux-2020 platform requires the Advanced Core Local Interruptor
+to provide facilities to route inter-processor interrupt and Machine
+interrupt to each RISC-V processor hart.
+===== Interrupt Assignments
==== System Peripherals
* UART/Serial Console
@@ -289,8 +304,8 @@ Any RISC-V system that uses at least RV32/64G can
meet the Embedded-2022
==== Interrupt Controller
-Embedded systems are recommended to use a spec compliant
-https://github.com/riscv/riscv-plic-spec[PLIC], a spec compliant
+Embedded systems are recommended to use a spec compliant
+a spec compliant
or both a CLIC and and PLIC.
Join email@example.com to automatically receive all group messages.