On Thu, 2021-04-29 at 09:00 +0530, Anup Patel wrote: This patch adds caption to all tables and use cross-reference
to refer tables in text. Also, we add SBI version column in
all SBI function listing tables.
Signed-off-by: Anup Patel <anup.patel@...>
---
riscv-sbi.adoc | 154 +++++++++++++++++++++++++++++++----------------
--
1 file changed, 99 insertions(+), 55 deletions(-)
diff --git a/riscv-sbi.adoc b/riscv-sbi.adoc
index 9731672..16b7380 100644
--- a/riscv-sbi.adoc
+++ b/riscv-sbi.adoc
@@ -99,9 +99,12 @@ returning an error code. This is analogous to
returning the C structure
};
----
-Standard SBI error codes are listed below
+The <<table_standard_sbi_errors>> below provides a list of Standard
SBI
+error codes.
-[cols="2,1", width=50%, align="center", options="header"]
+[#table_standard_sbi_errors]
+.Standard SBI Errors
+[cols="4,1", width=70%, align="center", options="header"]
|===
| Error Type |Value
| SBI_SUCCESS | 0
@@ -137,9 +140,12 @@ than XLEN harts, it should invoke multiple
instances of the SBI function
call. `hart_mask_base` can be set to `-1` to indicate that
`hart_mask` can
be ignored and all available harts must be considered.
-Any function using hart mask may return following possible error
value in
-addition to function specific error values.
+Any function using hart mask may return error values listed in the
+<<table_hart_mask_errors>> below which are in addition to function
+specific error values.
+[#table_hart_mask_errors]
+.HART Mask Errors
[cols="1,2", width=90%, align="center", options="header"]
|===
| Error code | Description
@@ -231,20 +237,24 @@ value for this CSR.
=== Function Listing
-[cols="3,1,1", width=70%, align="center", options="header"]
+[#table_base_function_list]
+.Base Function List
+[cols="3,2,1,1", width=70%, align="center", options="header"]
|===
-| Function Name | FID | EID
-| sbi_get_sbi_spec_version | 0 | 0x10
-| sbi_get_sbi_impl_id | 1 | 0x10
-| sbi_get_sbi_impl_version | 2 | 0x10
-| sbi_probe_extension | 3 | 0x10
-| sbi_get_mvendorid | 4 | 0x10
-| sbi_get_marchid | 5 | 0x10
-| sbi_get_mimpid | 6 | 0x10
+| Function Name | SBI Version | FID | EID
+| sbi_get_sbi_spec_version | 0.2 | 0 | 0x10
+| sbi_get_sbi_impl_id | 0.2 | 1 | 0x10
+| sbi_get_sbi_impl_version | 0.2 | 2 | 0x10
+| sbi_probe_extension | 0.2 | 3 | 0x10
+| sbi_get_mvendorid | 0.2 | 4 | 0x10
+| sbi_get_marchid | 0.2 | 5 | 0x10
+| sbi_get_mimpid | 0.2 | 6 | 0x10
|===
=== SBI Implementation IDs
+[#table_sbi_implementation_ids]
+.SBI Implementation IDs
[cols="1,2", width=70%, align="center", options="header"]
|===
| Implementation ID | Name
@@ -383,18 +393,22 @@ call doesn't return.
=== Function Listing
[cols="3,1,1,2", width=80%, align="center", options="header"]
+
+[#table_legacy_function_list]
+.Legacy Function List
+[cols="4,2,1,2,3", width=100%, align="center", options="header"]
|===
-| Function Name | FID | EID | Replacement EID
-| sbi_set_timer | 0 | 0x00 | 0x54494D45
-| sbi_console_putchar | 0 | 0x01 | N/A
-| sbi_console_getchar | 0 | 0x02 | N/A
-| sbi_clear_ipi | 0 | 0x03 | N/A
-| sbi_send_ipi | 0 | 0x04 | 0x735049
-| sbi_remote_fence_i | 0 | 0x05 | 0x52464E43
-| sbi_remote_sfence_vma | 0 | 0x06 | 0x52464E43
-| sbi_remote_sfence_vma_asid| 0 | 0x07 | 0x52464E43
-| sbi_shutdown | 0 | 0x08 | 0x53525354
-| *RESERVED* | | 0x09-0x0F |
+| Function Name | SBI Version | FID | EID |
Replacement EID
+| sbi_set_timer | 0.1 | 0 | 0x00 |
0x54494D45
+| sbi_console_putchar | 0.1 | 0 | 0x01 | N/A
+| sbi_console_getchar | 0.1 | 0 | 0x02 | N/A
+| sbi_clear_ipi | 0.1 | 0 | 0x03 | N/A
+| sbi_send_ipi | 0.1 | 0 | 0x04 |
0x735049
+| sbi_remote_fence_i | 0.1 | 0 | 0x05 |
0x52464E43
+| sbi_remote_sfence_vma | 0.1 | 0 | 0x06 |
0x52464E43
+| sbi_remote_sfence_vma_asid| 0.1 | 0 | 0x07 |
0x52464E43
+| sbi_shutdown | 0.1 | 0 | 0x08 |
0x53525354
+| *RESERVED* | | | 0x09-0x0F |
|===
== Timer Extension (EID #0x54494D45 "TIME")
@@ -420,10 +434,12 @@ interrupt by clearing `sie.STIE` CSR bit.
=== Function Listing
-[cols="3,1,1", width=70%, align="center", options="header"]
+[#table_time_function_list]
+.TIME Function List
+[cols="4,2,1,2", width=80%, align="center", options="header"]
|===
-| Function Name | FID | EID
-| sbi_set_timer | 0 | 0x54494D45
+| Function Name | SBI Version | FID | EID
+| sbi_set_timer | 0.2 | 0 | 0x54494D45
|===
== IPI Extension (EID #0x735049 "sPI: s-mode IPI")
@@ -444,9 +460,12 @@ Send an inter-processor interrupt to all the
harts defined in hart_mask.
Interprocessor interrupts manifest at the receiving harts as the
supervisor
software interrupts.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_ipi_send_errors>> below.
-[cols="1,2", width=80%, align="center", options="header"]
+[#table_ipi_send_errors]
+.IPI Send Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts successfully.
@@ -454,10 +473,12 @@ software interrupts.
=== Function Listing
-[cols="3,1,1", width=70%, align="center", options="header"]
+[#table_ipi_function_list]
+.IPI Function List
+[cols="4,2,1,2", width=80%, align="center", options="header"]
|===
-| Function Name | FID | EID
-| sbi_send_ipi | 0 | 0x735049
+| Function Name | SBI Version | FID | EID
+| sbi_send_ipi | 0.2 | 0 | 0x735049
|===
== RFENCE Extension (EID #0x52464E43 "RFNC")
@@ -482,9 +503,12 @@ struct sbiret sbi_remote_fence_i(unsigned long
hart_mask,
----
Instructs remote harts to execute `FENCE.I` instruction.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_fence_i_errors>> below.
-[cols="1,2", width=80%, align="center", options="header"]
+[#table_rfence_remote_fence_i_errors]
+.RFENCE Remote FENCE.I Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts successfully.
@@ -503,9 +527,12 @@ struct sbiret sbi_remote_sfence_vma(unsigned
long hart_mask,
Instructs the remote harts to execute one or more `SFENCE.VMA`
instructions,
covering the range of virtual addresses between start and size.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_sfence_vma_errors>> below.
-[cols="1,2", width=90%, align="center", options="header"]
+[#table_rfence_remote_sfence_vma_errors]
+.RFENCE Remote SFENCE.VMA Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts
@@ -528,9 +555,12 @@ Instruct the remote harts to execute one or more
`SFENCE.VMA` instructions,
covering the range of virtual addresses between start and size. This
covers
only the given `ASID`.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_sfence_vma_asid_errors>> below.
-[cols="1,2", width=90%, align="center", options="header"]
+[#table_rfence_remote_sfence_vma_asid_errors]
+.RFENCE Remote SFENCE.VMA with ASID Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts
@@ -554,9 +584,12 @@ covering the range of guest physical addresses
between start and size only
for the given `VMID`. This function call is only valid for harts
implementing
hypervisor extension.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_hfence_gvma_vmid_errors>> below.
-[cols="1,2", width=90%, align="center", options="header"]
+[#table_rfence_remote_hfence_gvma_vmid_errors]
+.RFENCE Remote HFENCE.GVMA with VMID Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts
@@ -582,9 +615,12 @@ covering the range of guest physical addresses
between start and size for all
the guests. This function call is only valid for harts implementing
hypervisor
extension.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_hfence_gvma_errors>> below.
-[cols="1,2", width=90%, align="center", options="header"]
+[#table_rfence_remote_hfence_gvma_errors]
+.RFENCE Remote HFENCE.GVMA Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts
@@ -611,9 +647,12 @@ covering the range of guest virtual addresses
between start and size for the
given `ASID` and current `VMID` (in `hgatp` CSR) of calling hart.
This function
call is only valid for harts implementing hypervisor extension.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_hfence_vvma_asid_errors>> below.
-[cols="1,2", width=90%, align="center", options="header"]
+[#table_rfence_remote_hfence_vvma_asid_errors]
+.RFENCE Remote HFENCE.VVMA with ASID Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts
@@ -639,9 +678,12 @@ covering the range of guest virtual addresses
between start and size for
current `VMID` (in `hgatp` CSR) of calling hart. This function call
is only
valid for harts implementing hypervisor extension.
-*Returns* following possible values via sbiret.
+The possible error codes returned in `sbiret.error` are shown in the
+<<table_rfence_remote_hfence_vvma_errors>> below.
-[cols="1,2", width=90%, align="center", options="header"]
+[#table_rfence_remote_hfence_vvma_errors]
+.RFENCE Remote HFENCE.VVMA Errors
+[cols="2,3", width=90%, align="center", options="header"]
|===
| Error code | Description
| SBI_SUCCESS | IPI was sent to all the targeted harts
@@ -654,16 +696,18 @@ valid for harts implementing hypervisor
extension.
=== Function Listing
-[cols="3,1,1", width=70%, align="center", options="header"]
+[#table_rfence_function_list]
+.RFENCE Function List
+[cols="4,2,1,2", width=80%, align="center", options="header"]
|===
-| Function Name | FID | EID
-| sbi_remote_fence_i | 0 | 0x52464E43
-| sbi_remote_sfence_vma | 1 | 0x52464E43
-| sbi_remote_sfence_vma_asid | 2 | 0x52464E43
-| sbi_remote_hfence_gvma_vmid | 3 | 0x52464E43
-| sbi_remote_hfence_gvma | 4 | 0x52464E43
-| sbi_remote_hfence_vvma_asid | 5 | 0x52464E43
-| sbi_remote_hfence_vvma | 6 | 0x52464E43
+| Function Name | SBI Version | FID | EID
+| sbi_remote_fence_i | 0.2 | 0 | 0x52464E43
+| sbi_remote_sfence_vma | 0.2 | 1 | 0x52464E43
+| sbi_remote_sfence_vma_asid | 0.2 | 2 | 0x52464E43
+| sbi_remote_hfence_gvma_vmid | 0.2 | 3 | 0x52464E43
+| sbi_remote_hfence_gvma | 0.2 | 4 | 0x52464E43
+| sbi_remote_hfence_vvma_asid | 0.2 | 5 | 0x52464E43
+| sbi_remote_hfence_vvma | 0.2 | 6 | 0x52464E43
|===
== Hart State Management Extension (EID #0x48534D "HSM") Reviewed-by: Atish Patra <atish.patra@...> -- Regards, Atish
|
