Re: [RESEND PATCH v5 1/2] riscv-platform-spec: PLIC and CLINT for Linux-2022 platform


Alistair Francis
 

On Wed, 2021-05-26 at 12:57 +0800, renba.chang@... wrote:
From: Abner Chang <renba.chang@...>

Initial description of PLIC  CLINT section of Linux-2022 platform.

On v5 commit,
- Remove CLINT from platform spec
- Require ACLINT on Linux2020 platform and have a link to
https://github.com/riscv/riscv-aclint/blob/master/riscv-aclint.adoc.
- Remove Machine mode timer from previous patch because that is in
the scope of ACLINT
- For Embedded-2022 platform, mention Machine mode timer and refer to
ACLINT for the definition of registers

On v4 commit,
- PLIC section with [DEPRECATED] in Linux- 2022 chapter
- CLINT section in Linux- 2022 chapter for M-mode timer. We don't
mention
  IPI because AIA already supported it.
- In Embedded-2022 Machine mode timer section, CLINT is not
mandatory.
- Separate section in appendix for the Machine mode timer registers

On v3 commit,
- Address review comments.

On v2 commit,
- CLINT is not deprecated.

- Add a standalone section for Machine Mode Timer in System
Peripherals.
  Do you think this is a good place for Machine Mode Timer?
  @Mayuresh, please check if you are ok with this change, not sure if
this
  overlaps with your text or not (The timer setion). I can remove
this
  if you prefer to put this with your patch.

- In Embedded-2022, refer to Machine Mode Timer in System Peripherals
  section and CLINT in Linux-2022 Platform.
  @Alistair, is this ok?

On v1 commit,
- Not sure where to put the [DEPRECATED].
- Change the reference of PLIC in section 2.2.2. Interrupt Controller
to
  1.1.3.2 PLIC + CLINT section.

Signed-off-by: Abner Chang <renba.chang@...>
Cc: Alistair Francis <alistair.francis@...>
Cc: Sunil V L <sunilvl@...>
Cc: Mayuresh Chitale <mchitale@...>
---
 riscv-platform-spec.adoc | 52 ++++++++++++++++++--------------------
--
 1 file changed, 23 insertions(+), 29 deletions(-)

diff --git a/riscv-platform-spec.adoc b/riscv-platform-spec.adoc
index 160c74a..db6dce3 100644
--- a/riscv-platform-spec.adoc
+++ b/riscv-platform-spec.adoc
@@ -49,9 +49,23 @@ include::profiles.adoc[]
 * Start Address
 
 ==== Interrupt Controller
-* AIA
-* PLIC + CLINT
-* Interrupt Assignments
+===== AIA[[AIA]]
+===== PLIC[DEPRECATED][[PLIC]]
+The Platform Level Interrupt Controller (PLIC) provides facilities
to route
+the non-local interrupts to the external interrupt of a hart context
+with a given privilege mode in a given hart. The number of non-local
interrupt
+sources supported by PLIC and how does each of them connect to the
hart
+context is PLIC core implementation-specific. +
+(Refer to
https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc[RISC-V
 PLIC Specification]
+for the implementation reference of PLIC operation parameters)
+
+===== ACLINT
+Linux-2020 platform requires the Advanced Core Local Interruptor
(ACLINT, refer
+to
https://github.com/riscv/riscv-aclint/blob/master/riscv-aclint.adoc[RISC-V
 ACLINT Specification])
+to provide facilities to route inter-processor interrupt and Machine
mode timer
+interrupt to each RISC-V processor hart.
+
+===== Interrupt Assignments
 
 ==== System Peripherals
 * UART/Serial Console
@@ -289,9 +303,8 @@ Any RISC-V system that uses at least RV32/64G can
meet the Embedded-2022
 specification.
 
 ==== Interrupt Controller
-Embedded systems are recommended to use a spec compliant
-https://github.com/riscv/riscv-plic-spec[PLIC], a spec compliant
-
https://github.com/riscv/riscv-fast-interrupt/blob/master/clic.adoc[CLIC]
+Embedded systems are recommended to use a spec compliant
<<PLIC,PLIC>>, a spec
+compliant
https://github.com/riscv/riscv-fast-interrupt/blob/master/clic.adoc[CLIC]
 or both a CLIC and and PLIC.
 
 If using just a PLIC the system must continue to use the original
basic
@@ -303,8 +316,8 @@ must be supported.
 Embedded systems cannot use a non-compliant interrupt controller and
still
 call it a PLIC or CLIC.
 
-==== Machine Timer
-The RISC-V machine timer (controlled via `mtime` and `mtimecmp`)
must be
+==== Machine Mode Timer
+The RISC-V Machine mode timer (controlled via `mtime` and
`mtimecmp`) must be
 implemented. The two registers must be memory mapped as required by
the RISC-V
 specification.
 
@@ -314,27 +327,8 @@ adjacent to each other with the `mtime` region
at the lower address.
 The starting address of this region can be located anywhere in
 memory, including inside other peripherals, as long as the start
address is
 4 byte aligned.
-
-An example of the memory layout for a 32-bit system with a single
hart is below
-
--------------------------
-=========================
-| 0x00 |  mtime low     |
-| 0x04 |  mtime high    |
-| 0x08 |  mtimecmp low  |
-| 0x0C |  mtimecmp high |
-=========================
--------------------------
-
-and for a 64-bit system with 2 harts
-
----------------------------
-===========================
-| 0x00 |  mtime           |
-| 0x08 |  mtimecmp hart 1 |
-| 0x10 |  mtimecmp hart 2 |
-===========================
You have removed the original example, but not the original
description. If we aren't supporting the adjancent addresses the
paragraph above this should be removed.

I still prefer to allow either adjacent registers (as currently
described) OR the new ACLINT, but if everyone else thinks the ACLINT is
the only way to go then that's fine.

Alistair

----------------------------
+
https://github.com/riscv/riscv-aclint/blob/master/riscv-aclint.adoc[RISC-V
 ACLINT Specification]
+defines the memory map layout of Machine mode timer registers.
 
 ==== Memory Map
 It is recommended that main memory and loadable code (not ROM) start
at

Join tech-unixplatformspec@lists.riscv.org to automatically receive all group messages.