16550 UART Requirement for OS-A Platforms
During our Platform HSC meeting today, one of the topics that came up for discussion was whether we should mandate the 16550 UART for all OS-A platforms and keep this requirement within the “Common Requirements” document that would apply to all OS-A platforms.
I am starting this thread to discuss this topic. Please provide all your feedback in this thread.
Currently, we are mandating the 16550 UART requirement for both the OS-A Embedded and OS-A Server platforms. The goal is for hardware to implement support for the 16550 UART and the low-level bring-up firmware to support this UART as a console. We are not mandating any OS requirements for UART.
Below are some of the reasons for this.
To give context, the below is the wording we proposed for the UART feature requirement as is mentioned in the spec currently.
2.1.5. System Peripherals
126.96.36.199. UART/Serial Console
In order to facilitate the bring-up and debug of the low level initial platform, hardware is required to implement a UART port that confirms to the following requirements and firmware must support the console using this UART:
Jonathan Behrens <behrensj@...>
toggle quoted message Show quoted text
Could you say a bit more about the OS aspect? Is the idea that an OS must be provided access to a UART, but has the option to ignore it in favor of other I/O methods? I don't think we should allow firmware to block the OS from using the UART, but I'm not sure if that is being proposed
On Mon, Nov 15, 2021 at 3:08 PM Kumar Sankaran via lists.riscv.org <ksankaran=ventanamicro.com@...> wrote:
On Tue, Nov 16, 2021 at 9:05 PM Jonathan Behrens <behrensj@...> wrote:
The required UART is not for exclusive use by firmwares so the OS can
certainly use the UART but it is not mandatory for the OS to support
|1 - 3 of 3|