To have a meaningful H-extension support, both OS/A-base and
OS/A-server platforms must comply with additional requirements
for H-extension.
Signed-off-by: Anup Patel <anup.patel@...>
---
riscv-platform-spec.adoc | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/riscv-platform-spec.adoc b/riscv-platform-spec.adoc
index a24281f..b424c38 100644
--- a/riscv-platform-spec.adoc
+++ b/riscv-platform-spec.adoc
@@ -120,6 +120,12 @@ The M platform has the following extensions:
values.)
** Platforms is allowed to operate only in little-endian mode i.e.
implementations must hardwire the mstatus.MBE field to 0.
+** If the H-extension is implemented then the OS-A platform must comply with
+ the following additional requirements:
+*** Upon guest page faults taken into HS-mode, the `htval` CSR must provide
+ the guest physical address right shifted by 2.
+*** Upon guest page faults taken into M-mode, the `mtval2` CSR must provide
+ the guest physical address right shifted by 2.
[sidebar]
--
@@ -448,9 +454,13 @@ base with the additional requirements as below.
==== Architecture
The platforms which conform to server extension are required to implement +
-- RV64 support
-- RISC-V H ISA extension
-- VMID support
+* RV64 support
+* RISC-V ISA H-extension with following additional requirements:
+** VMID support
+** Upon load/store/AMO exceptions taken into HS-mode, the `htinst` CSR must
+ provide transformed standard instruction.
+** Upon load/store/AMO exceptions taken into M-mode, the `mtinst` CSR must
+ provide transformed standard instruction.
==== PMU
--
2.25.1
