This is to announce the start of the public review period for
the RISC-V UEFI Protocol specification. This specification is
considered as frozen now as per the RISC-V International policies.

The review period begins today, Wednesday March 23, and ends on Friday
May 6 (inclusive).

The specification can be found here
https://github.com/riscv-non-isa/riscv-uefi/releases/download/1.0-rc3/RISCV_UEFI_PROTOCOL-spec.pdf

which was generated from the source available in the following GitHub
repo:
https://github.com/riscv-non-isa/riscv-uefi

The specification is also attached in this email.

To respond to the public review, please either reply to this email or
send comments to the platform mailing list[1] or add issues to the
GitHub repo[2]. We welcome all input and appreciate your time and
effort in helping us by reviewing the specification.

During the public review period, corrections, comments, and
suggestions, will be gathered for review by the Platform HSC members.
Any minor corrections and/or uncontroversial changes will be
incorporated into the specification. Any remaining issues or proposed changes
will be addressed in the public review summary report. If there are no
issues that require incompatible changes to the public review
specification, the platform HSC will recommend the updated
specifications be approved and ratified by the RISC-V Technical
Steering Committee and the RISC-V Board of Directors.

Thanks to all the contributors for all their hard work.

[1] tech-unixplatformspec@...
[2] https://github.com/riscv-non-isa/riscv-uefi/issues

Regards
Sunil

(Resending for RISC-V ISA-DEV and RISC-V SW-DEV because previous email
was not received on these lists.)