[PATCH v6 6/8] Follow profile naming as-per latest RISC-V profiles spec
We should follow profile naming as-per latest RISC-V profiles
specification. Also, we should avoid explicit mentions of
"RV32xxx" and "RV64xxx" ISA strings.
Signed-off-by: Anup Patel <anup.patel@...>
Reviewed-by: Alistair Francis <alistair.francis@...>
Reviewed-by: Atish Patra <atish.patra@...>
riscv-platform-spec.adoc | 40 +++++++++++++++++++---------------------
1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/riscv-platform-spec.adoc b/riscv-platform-spec.adoc
index b6a0695..438f3a9 100644
@@ -35,8 +35,9 @@ toc::
|RVA22 | RISC-V Application 2022 <<spec_profiles>>
|EE | Execution Environment
|OSPM | Operating System Power Management
-|RV32GC | RISC-V 32-bit general purpose ISA described as RV32IMAFDC.
-|RV64GC | RISC-V 64-bit general purpose ISA described as RV64IMAFDC.
+|RVA22U64 | RISC-V 2022 user-mode profile <<spec_profiles>>
+|RVA22S64 | RISC-V 2022 supervisor-mode profile <<spec_profiles>>
+|RVA22M64 | RISC-V 2022 machine-mode profile <<spec_profiles>>
|RAS | Reliability, Availability, and Serviceability
|CLINT | Legacy Core-Local Interrupt Controller
|ACLINT | Advanced Core-Local Interrupt Controller <<spec_aclint>>
@@ -96,8 +97,12 @@ The M platform has the following extensions:
// Base feature set for OS-A Platform
+The OS-A platform must comply with the RVA22U, RVA22S and RVA22M profiles
+defined by the RISC-V profiles specification <<spec_profiles>> with the
+following additional requirements:
* ISA Requirements
-** The OS-A platform is required to comply with the RVA22 profile.
** Within main-memory regions, aligned instruction fetch must be atomic, up to
the smaller of ILEN and XLEN bits. In particular, if an aligned 4-byte word
is stored with the `sw` instruction, then any processor attempts to execute
@@ -430,9 +435,6 @@ systems.
discovery mechanism, etc.
- The requirements are operating system agnostic, specific firmware/bootloader
-- Any RV32GC or RV64GC platform seeking compatibility with the base
-specification is required to implement all three privilege modes i.e. M, S and
- For the generic mandatory requirements this base specification will refer to
the EBBR Specification. Any deviation from the EBBR will be explicitly
mentioned in the requirements.
@@ -494,14 +496,13 @@ promotes interoperability.
// Server extension for OS-A Platform
=== Server Extension
-The server extension specifies additional requirements for RV64I based server
-class platforms. The server extension includes all of the requirements for the
+The server extension specifies additional requirements for server class
+platforms. The server extension includes all of the requirements for the
base with the additional requirements as below.
The platforms which conform to server extension are required to implement +
-* RV64 support
* The `time` CSR must be implemented in hardware
* The Sstc extension <<spec_priv_sstc>> must be implemented
* RISC-V ISA H-extension with following additional requirements:
@@ -558,9 +559,9 @@ following additional requirements:
==== Boot and Runtime Requirements
-The boot and system firmware for the RV64I server platforms required to be
-based on UEFI as per the base specification with some additional
-requirements as mentioned below.
+The boot and system firmware for the server platforms must support UEFI as
+defined in by the OS-A base platform with some additional requirements
+described in following sub-setions.
====== PCIe support
The platforms are required to implement *EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL* and other
@@ -589,10 +590,10 @@ the base spec requirements.
-For RV64I server platforms, ACPI tables are required to be passed via UEFI
-to the operating system for the purpose of discovery and the configuration of
-the hardware. This section defines the required ACPI tables and objects. All
-other ACPI tables for RISC-V can be implemented as needed adhering to the ACPI
+For server platforms, ACPI tables are required to be passed via UEFI to the
+operating system for the purpose of discovery and the configuration of the
+hardware. This section defines the required ACPI tables and objects. All other
+ACPI tables for RISC-V can be implemented as needed adhering to the ACPI
spec version 6.4+(RISC-V support when added).
In ACPI namespace, processors are required to be defined under the System Bus
@@ -968,11 +969,8 @@ although they do not have to in order to meet the specification.
-The M Platform specification depends on the RVM22 specification and all
-requirements from RVM22 must be met.
-Any RISC-V system that uses at least RV32/64G can meet the M Platform
+The M Platform must comply with the RVM22M profile defined by the RISC-V
+profiles specification <<spec_profiles>>.
==== Interrupt Controller
Embedded systems are recommended to use a spec compliant PLIC <<spec_plic>>,