Minutes from 2020/10/2 meeting


Krste Asanovic
 

Date: 2020/10/2
Task Group: Vector Extension
Chair: Krste Asanovic
Co-Chair: Roger Espasa
Number of Attendees: ~12
Current issues on github: https://github.com/riscv/riscv-v-spec

Issues discussed;

# Implementation availability - discussion around when FPGA RTL
implementations could be made available to software community

# Imprecise traps

There was extensive discussion on handling of how to allow imprecise
traps in some implementations.

For application processors, the general 'V' extension will mandate
traps precise to the vector element, with vstart pointing at the
faulting element (and for memory traps, badvaddr pointing to faulting
memory address).

For embedded processors, precise traps can be expensive and
unnecessary to support. There was extensive discussion on the
possible spectrum of less-than-precise trap models.

One point in the design space supports "swappable" traps, where the
microarchitectural state can be saved and restored around a trap
handler using special instructions, but it was decided to postpone
defining this model until later.

The consensus was to define the simplest imprecise model that does not
allow restart but does indicate the faulting instruction (epc/cause).

An open question was around debug watchpoints, and whether these
needed to be precise or whether two run modes should be supported
(slow but precise watchpoints, or fast but imprecise watchpoint
traps).

Join tech-vector-ext@lists.riscv.org to automatically receive all group messages.