Re: Vector Task Group minutes 2020/12/04
I don’t think a separate mask register will do at all. It would take a mask register file with at least 8 and maybe 16 registers. Lots of compare results need to be kept and operations need to be done on mask registers. I don't think we should have a separate mask register file.toggle quoted messageShow quoted text
From: email@example.com <firstname.lastname@example.org> On Behalf Of swallach
Sent: Wednesday, December 16, 2020 12:26 PM
To: Alex Solomatnikov <email@example.com>
Cc: Krste Asanovic <firstname.lastname@example.org>; email@example.com
Subject: Re: [RISC-V] [tech-vector-ext] Vector Task Group minutes 2020/12/04
i totally agree. if this is done, then instructions like: count bits, etc can directly apply to the mask register.
also, from a hardware implementation, the VM register can be implemented with LATÇHES. this facilitates a better implementation (imho) for operations under mask
and yes load and store VM are required
If separate loads and stores are introduced for mask, then separate vmask register can be introduced to avoid dual use of v0 (as a regular vector register and as a mask register) and its complications.